Conference Paper

Development of a cost effective antenna radiation pattern measurement setup

Nov 16, 2016

DOI: 10.1109/MMS.2016.7803823

Published in: 2016 16th Mediterranean Microwave Symposium (MMS) - Abu Dhabi, United Arab Emirates, Nov. 2016

Publisher: IEEE

A. Rehman T. Rasul M. F. Shafique Bilal Ijaz K. S. Alimgeer M. S. Khan Raed M. Shubair / Nazih Khaddaj Mallat

This paper presents an insight on the recently developed antenna pattern measurement system at COMSATS Institute of Information Technology (CIIT), Islamabad, Pakistan. Microwave Components and Devices (MCAD) research group at CIIT has been involved in antenna focused research activities but unavailability of anechoic chamber to measure radiation patterns has remained a huge handicap. In this regard efforts have been made to indigenously develop a radiation pattern measurement system. The system can measure radiation patterns from 600 MHz up to 26 GHz. The reflections from surroundings are suppressed by filtering the delayed signals in time domain. The system is automated through a Labview program which also provides users with the control and flexibility on various parameters. The system can provide gain at four frequency points simultaneously along with phase information.

Other Researches

A Three-Port Polarization and Pattern Diversity Ring Antenna

In this letter, a novel design of a three-port antenna exhibiting pattern and polarization diversity characteristics is proposed. The radiating element of the proposed antenna comprises a ring loaded with periodical interdigital capacitors. The sele...

Comparison of sampling possibilities for circularly band limited two dimensional signals

Sampling of two dimensional signals is a rarely discussed aspect of signal processing. The scientific community has become used to the idea of rectangular sampling to the point that other possibilities are generally not even considered. The populari...

Comparison of RLS and LMS algorithms for interference cancelation in a fixed point to point microwave link

An efficient channel estimation and interference cancelation method for a fixed point to point (p2p) microwave link is designed and investigated; it is based on Least Mean Square (LMS) and Recursive Least Square (RLS) algorithms. The LMS and RLS alg...

SIR-based miniaturized EBG structure for millimeter-wave isolation improvement applications

A new uni-planar compact electromagnetic bandgap (EBG) structure is presented. The proposed EBG unit-cell is designed based on the stepped-impedance resonator (SIR) technique. Results show that the proposed EBG structure provides a wide frequency ba...

In-phase reflection and band-gap characteristics of EBG structure for millimeter-wave applications

Design and analysis of millimeter-wave (MMW) mushroom-like, circular-patch electromagnetic band-gap (EBG) structure is presented. The in-phase reflection and band-gap characteristics of the proposed EBG structure are investigated. Results show that ...

On the design of millimetre-wave antennas for 5G

This paper addresses the millimeter-wave antenna design aspect of the future 5G wireless systems. The paper reviews the objectives and requirements of millimeter-wave antennas for 5G. Recent advances in mm-wave antenna are reported and design guidel...

Cognitive Chaotic UWB-MIMO Detect-Avoid Radar for Autonomous UAV Navigation

A cognitive detect and avoid radar system based on chaotic UWB-MIMO waveform design to enable autonomous UAV navigation is presented. A Dirichlet-process-mixture-model (DPMM)-based Bayesian clustering approach to discriminate extended targets and a ...

Development of Substrate Integrated Waveguide filters for low-cost high-density RF and microwave circuit integration: Pseudo-elliptic dual mode cavity band-pass filters

The properties of dual mode resonance in planar SIW-based rectangular cavities are investigated and discussed. A specific mode combination of dual mode cavity presents a unique frequency response feature. With the aid of an optimization process or s...

Development of Substrate-Integrated Waveguide Filters for Low-Cost High-Density RF and Microwave Circuit Integration: Direct-Coupled Cavity Bandpass Filters With Chebyshev Response

Direct-coupled cavity bandpass filters with Chebyshev response are studied and realized, using the technique of planar substrate-integrated waveguide (SIW) for the purpose of high-density integration and cost reduction. Using a general mode-matching...

Quasi-TEM rectangular waveguides with frequency selective surface walls: Part I - Electrical properties and geometrical characteristics

Electrical properties and geometrical characteristics of frequency‐selective‐surface‐loaded quasi‐transverse electromagnetic (TEM) rectangular waveguides are investigated in detail. The properties of electrical field distributions over the c...

Quasi-TEM Rectangular Waveguides with Frequency Selective Surface Walls: Part II—Physical Mechanism

The physical mechanism of quasi‐TEM (transverse electromagnetic) waveguides with frequency selective surface (FSS) walls is established on the basis of an equivalent magnetic current technique in this paper. The equivalent magnetic current distrib...