Article

Implementation of Spatial/Polarization Diversity for Improved-Performance Circularly Polarized Multiple-Input-Multiple-Output Ultra-Wideband Antenna

Mar 31, 2020

DOI: 10.1109/ACCESS.2020.2984697

Published in: Journal

Publisher: IEEE

U Ullah IB Mabrouk S Koziel M Al-Hasan

In this paper, spatial and polarization diversities are simultaneously implemented in an ultra-wideband (UWB) multiple-input-multiple-output (MIMO) antenna to reduce the correlation between the parallel-placed radiators. The keystone of the antenna is systematically modified coplanar ground planes that enable excitation of circular polarization (CP). To realize one sense of circular polarization as well as ultra-wideband operation, an extended rectangular slot is etched on the left-hand-side of the coplanar waveguide (CPW) feed. This is combined with the asymmetrical ground plane geometry on the right-hand-side of the feeding line. The current flowing on the slotted ground plane forms a quasi-loop and generates CP, whereas the combination of the vertical current on the feedline and the horizontal current on the asymmetric ground plane adds to the axial ratio (AR) bandwidth. To implement the MIMO design with polarization and spatial diversity, the position of the coplanar ground planes is switched with respect to the feedline, and placed in a parallel formation with the edge-to-edge distance of 0.29λ0 . All geometrical parameters are optimized at the full-wave level of description before prototyping and experimental characterization. Simulation and measured results indicate that the proposed MIMO antenna features approximately 82% impedance bandwidth from 2.9 GHz to 7.1 GHz and 68.5% (3.1 GHz- 6.35 GHz) AR bandwidth. Moreover, the peak envelop correlation coefficient (ECC) is below 0.003, which corresponds to almost no correlation between the radiators. The antenna can be operated with either bidirectional or unidirectional characteristics, covering multiple commercial application bands including WLAN and WiMax.

Other Researches

Design-Oriented Two-Stage Surrogate Modeling of Miniaturized Microstrip Circuits With Dimensionality Reduction

Contemporary microwave design heavily relies on full-wave electromagnetic (EM) simulation tools. This is especially the case for miniaturized devices where EM cross-coupling effects cannot be adequately accounted for using equivalent network models....

An Efficient Routing Scheme for Intrabody Nanonetworks using Artificial Bee Colony Algorithm

An Intrabody Nanonetwork (IBNN) is constituted by nanoscale devices that are implanted inside the human body for monitoring of physiological parameters for disease diagnosis and treatment purposes. The extraordinary accuracy and precision of these n...

Circular polarization diversity implementation for correlation reduction in wideband low-cost multiple-input-multiple-output antenna

In this paper, a multiple-input-multiple-output (MIMO) antenna featuring circular polarization diversity, and designed on a common coplanar ground is presented. The proposed antenna design utilizes a coplanar waveguide (CPW) feeding technique with t...

Design of Ultra-Wideband Circularly Polarized Multiple-Input Multiple-Output Antenna with Polarization Diversity

This paper presents an ultra-wideband (UWB) circularly polarized (CP) multiple-input multiple-output (MIMO) antenna with polarization diversity. The proposed antenna is comprised of a coplanar waveguide feed with modified geometry of the coplanar gr...

A Novel Design of Radiation Pattern-Reconfigurable Antenna System for Millimeter-Wave 5G Applications

In this paper, a novel design of dielectric resonator antenna (DRA) with a reconfigurable radiation pattern capability is presented. Reconfigurability in the azimuth plane is achieved by symmetrically placing six electromagnetic bandgap (EBG) sec...

On the Path Loss Model for 5-GHz Microwave-Based Pinless Subsea Connectors

In this work, a simple propagation channel model for microwave-based pinless subsea connectors in the 5 GHz band is presented. Both high electromagnetic attenuation in seawater due to absorption and the near-field working conditions typically presen...

Hybrid Isolator for Mutual-Coupling Reduction in Millimeter-Wave MIMO Antenna Systems

A novel millimeter-wave hybrid isolator is presented to reduce the mutual-coupling (MC) between two closely-spaced dielectric resonator (DR) antennas at 60 GHz. The proposed hybrid isolator consists of a combination of a new uni-planar compact elect...

Experimental Validation of Receiver Sensitivity for 100-Mbps Data Rates in Seawater by Using 2.4 GHz-Low-Power Electronics

This paper presents an experimental validation of the receiver sensitivity for 100- Mbps microwave data communications in a typical subsea environment. It is demonstrated that underwater microwave-based pinless connector solutions can perform under ...

High gain dielectric resonator antenna with soft cavity and soft surface for millimeter-wave applications

In this paper, a 60 GHz high-gain dielectric resonator antenna (DRA), integrated with soft surface and capacitive soft cavity is presented. The soft surface consists of a perforated dielectric cylinder, shorting vias, and three concentric layers of ...

Millimeter-Wave Compact EBG Structure for Mutual Coupling Reduction Applications

A new millimeter-wave (MMW), electromagnetic band-gap (EBG) structure is presented. The proposed EBG structure without the use of metallic vias or vertical components is formed by etching two slots and adding two connecting bridges to a conventional...

Millimeter-Wave EBG-Based Aperture-Coupled Dielectric Resonator Antenna

Design, fabrication and testing of millimeter-wave (MMW) dielectric resonator antenna (DRA) surrounded by electromagnetic band-gap (EBG) structure are presented. For this purpose, MMW mushroom-like, circular patch EBG (CP-EBG) cell is designed and f...