Article

A Compact Self-Triplexing Antenna for Head Implants

Jul 01, 2024

DOI: 10.1109/TAP.2024.3450332

Published in: IEEE Transactions on Antennas and Propagation

Publisher: IEEE

M Al-Hasan IB Mabrouk / Amjad Iqbal denidni

This paper introduces a novel self-triplexing implantable antenna designed to operate in head implants. It works at three distinct frequency bands: 403 MHz on Port 1, 915 MHz on Port 2, and 1410 MHz on Port 3. The antenna design incorporates a high-permittivity laminate and triangular meandered resonators, which extend the current path and enable significant miniaturization. The resulting antenna occupies a volume of only 8 mm × 12.5 mm × 0.3 mm (30 mm3). An ultra-thin substrate of 0.3 mm is utilized to reduce mutual coupling between the ports, achieving values below -24.3 dB. By activating each port of the antenna with 1W power, the 10-g specific absorption rate (SAR) values are recorded at 45.9, 42.4, and 41.2 W/kg for the frequencies 403, 915, and 1410 MHz, respectively. The antenna exhibits peak gains of -35.7, -31.3, and -28.6 dBi at the respective frequencies. Comprehensive link budget and SAR analyses demonstrate the antenna's potential for head implant applications. The validation of the fabricated prototype is conducted through measurements inside minced pork meat. Additionally, two software-defined radios are used to practically validate the simultaneous transmit and receive capabilities. To the authors' knowledge, this is the first self-triplexing implantable antenna, a promising choice for next-generation implantable devices.

Other Researches

A Compact Dual-Band Implantable MIMO Antenna for Wireless Capsule Endoscopy

This paper introduces a compact dual-element multiple-input multiple-output (MIMO) implantable antenna for high-data-rate wireless capsule endoscopy (WCE) applications. The proposed antenna works at 915 and 2450 MHz with respective fractional bandwi...

Self-Quadruplexing Antenna for Scalp-Implantable Devices

This article presents a compact self-quadruplexing antenna for scalp-implantable devices. The proposed self-quadruplexing antenna operates at 168 MHz [industrial, scientific, and medical (ISM) band], 433 MHz (ISM band), 915 MHz (ISM band), and 1400 ...

Dual-Band 3-D Implantable MIMO Antenna for IoT-Enabled Wireless Capsule Endoscopy

This paper proposes an implantable antenna using a three-dimensional (3-D) multiple-input multiple-output (MIMO) configuration, which operates at 915 and 2450 MHz bands. Both frequency bands are wider enough to cover the important industrial, scient...

SIW-based frequency-adjustable antenna for IoT-based duplex wireless devices

This paper proposes a compact and frequency-adjustable/reconfigurable dielectric (DR)-loaded eighth-mode substrate integrated waveguide (EMSIW) antenna for duplex wireless communications. The miniaturization of the resonators is realized using a rec...

Metamaterial inspired electromagnetic bandgap filter for ultra-wide stopband screening devices of electromagnetic interference

Presented here is a reactively loaded microstrip transmission line that exhibit an ultra-wide bandgap. The reactive loading is periodically distributed along the transmission line, which is electromagnetically coupled. The reactive load consists of ...

A Novel Design of Radiation Pattern-Reconfigurable Antenna System for Millimeter-Wave 5G Applications

In this paper, a novel design of dielectric resonator antenna (DRA) with a reconfigurable radiation pattern capability is presented. Reconfigurability in the azimuth plane is achieved by symmetrically placing six electromagnetic bandgap (EBG) sec...

On the Path Loss Model for 5-GHz Microwave-Based Pinless Subsea Connectors

In this work, a simple propagation channel model for microwave-based pinless subsea connectors in the 5 GHz band is presented. Both high electromagnetic attenuation in seawater due to absorption and the near-field working conditions typically presen...

Hybrid Isolator for Mutual-Coupling Reduction in Millimeter-Wave MIMO Antenna Systems

A novel millimeter-wave hybrid isolator is presented to reduce the mutual-coupling (MC) between two closely-spaced dielectric resonator (DR) antennas at 60 GHz. The proposed hybrid isolator consists of a combination of a new uni-planar compact elect...

Experimental Validation of Receiver Sensitivity for 100-Mbps Data Rates in Seawater by Using 2.4 GHz-Low-Power Electronics

This paper presents an experimental validation of the receiver sensitivity for 100- Mbps microwave data communications in a typical subsea environment. It is demonstrated that underwater microwave-based pinless connector solutions can perform under ...

High gain dielectric resonator antenna with soft cavity and soft surface for millimeter-wave applications

In this paper, a 60 GHz high-gain dielectric resonator antenna (DRA), integrated with soft surface and capacitive soft cavity is presented. The soft surface consists of a perforated dielectric cylinder, shorting vias, and three concentric layers of ...

Millimeter-Wave Compact EBG Structure for Mutual Coupling Reduction Applications

A new millimeter-wave (MMW), electromagnetic band-gap (EBG) structure is presented. The proposed EBG structure without the use of metallic vias or vertical components is formed by etching two slots and adding two connecting bridges to a conventional...

Millimeter-Wave EBG-Based Aperture-Coupled Dielectric Resonator Antenna

Design, fabrication and testing of millimeter-wave (MMW) dielectric resonator antenna (DRA) surrounded by electromagnetic band-gap (EBG) structure are presented. For this purpose, MMW mushroom-like, circular patch EBG (CP-EBG) cell is designed and f...