Metamaterial inspired electromagnetic bandgap filter for ultra-wide stopband screening devices of electromagnetic interference
Jan 10, 2023
DOI: 10.1038/s41598-023-40567-x
Published in: Scientific Reports
Publisher: Nature
Presented here is a reactively loaded microstrip transmission line that exhibit an ultra-wide bandgap. The reactive loading is periodically distributed along the transmission line, which is electromagnetically coupled. The reactive load consists of a circular shaped patch which is converted to a metamaterial structure by embedded on it two concentric slit-rings. The patch is connected to the ground plane with a via-hole. The resulting structure exhibits electromagnetic bandgap (EBG) properties. The size and gap between the slit-rings dictate the magnitude of the reactive loading. The structure was first theoretically modelled to gain insight of the characterizing parameters. The equivalent circuit was verified using a full-wave 3D electromagnetic (EM) solver. The measured results show the proposed EBG structure has a highly sharp 3-dB skirt and a very wide bandgap, which is substantially larger than any EBG structure reported to date. The bandgap rejection of the single EBG unit-cell is better than − 30 dB, and the five element EBG unit-cell is better than − 90 dB. The innovation can be used in various applications such as biomedical applications that are requiring sharp roll-off rates and high stopband rejection thus enabling efficient use of the EM spectrum. This can reduce guard band and thereby increase the channel capacity of wireless systems.
Other Researches
A Compact Dual-Band Implantable MIMO Antenna for Wireless Capsule Endoscopy
This paper introduces a compact dual-element multiple-input multiple-output (MIMO) implantable antenna for high-data-rate wireless capsule endoscopy (WCE) applications. The proposed antenna works at 915 and 2450 MHz with respective fractional bandwi...
Self-Quadruplexing Antenna for Scalp-Implantable Devices
This article presents a compact self-quadruplexing antenna for scalp-implantable devices. The proposed self-quadruplexing antenna operates at 168 MHz [industrial, scientific, and medical (ISM) band], 433 MHz (ISM band), 915 MHz (ISM band), and 1400 ...
A Compact Self-Triplexing Antenna for Head Implants
This paper introduces a novel self-triplexing implantable antenna designed to operate in head implants. It works at three distinct frequency bands: 403 MHz on Port 1, 915 MHz on Port 2, and 1410 MHz on Port 3. The antenna design incorporates a high-...
Dual-Band 3-D Implantable MIMO Antenna for IoT-Enabled Wireless Capsule Endoscopy
This paper proposes an implantable antenna using a three-dimensional (3-D) multiple-input multiple-output (MIMO) configuration, which operates at 915 and 2450 MHz bands. Both frequency bands are wider enough to cover the important industrial, scient...
SIW-based frequency-adjustable antenna for IoT-based duplex wireless devices
This paper proposes a compact and frequency-adjustable/reconfigurable dielectric (DR)-loaded eighth-mode substrate integrated waveguide (EMSIW) antenna for duplex wireless communications. The miniaturization of the resonators is realized using a rec...
In this paper, a novel design of dielectric resonator antenna (DRA) with a reconfigurable radiation pattern capability is presented. Reconfigurability in the azimuth plane is achieved by symmetrically placing six electromagnetic bandgap (EBG) sec...
On the Path Loss Model for 5-GHz Microwave-Based Pinless Subsea Connectors
In this work, a simple propagation channel model for microwave-based pinless subsea connectors in the 5 GHz band is presented. Both high electromagnetic attenuation in seawater due to absorption and the near-field working conditions typically presen...
Hybrid Isolator for Mutual-Coupling Reduction in Millimeter-Wave MIMO Antenna Systems
A novel millimeter-wave hybrid isolator is presented to reduce the mutual-coupling (MC) between two closely-spaced dielectric resonator (DR) antennas at 60 GHz. The proposed hybrid isolator consists of a combination of a new uni-planar compact elect...
This paper presents an experimental validation of the receiver sensitivity for 100- Mbps microwave data communications in a typical subsea environment. It is demonstrated that underwater microwave-based pinless connector solutions can perform under ...
In this paper, a 60 GHz high-gain dielectric resonator antenna (DRA), integrated with soft surface and capacitive soft cavity is presented. The soft surface consists of a perforated dielectric cylinder, shorting vias, and three concentric layers of ...
Millimeter-Wave Compact EBG Structure for Mutual Coupling Reduction Applications
A new millimeter-wave (MMW), electromagnetic band-gap (EBG) structure is presented. The proposed EBG structure without the use of metallic vias or vertical components is formed by etching two slots and adding two connecting bridges to a conventional...
Millimeter-Wave EBG-Based Aperture-Coupled Dielectric Resonator Antenna
Design, fabrication and testing of millimeter-wave (MMW) dielectric resonator antenna (DRA) surrounded by electromagnetic band-gap (EBG) structure are presented. For this purpose, MMW mushroom-like, circular patch EBG (CP-EBG) cell is designed and f...